Filter
Top Products
40
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number,
do the following:
1. Follow either of the New Contacts entry procedures (see
“Adding a New Contacts Entry” on page 34) until you
enter a name for the entry.
2. After entering the Contacts entry name,
do not press
. Instead, use the Up/Down Up/Down navigation
keys to highlight the number field.
3. Press
Options
. The following options appear in the
display:
• Set Speed Dial
— Assign a speed dial number.
• Set as default
— Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
•Wait
— A hard pause (waits for input from you).
• 2-Sec Pause
— A 2-second pause after which dialing resumes
(see
“Add Pauses to Contacts Numbers”
on page 36 for
more information).
Use the Up/Down Up/Down navigation keys to highlight
Set Speed Dial
, then press . The
Speed Dial
screen
appears in the display.
4. Use the Up/Down Up/Down navigation keys to highlight
an Unassigned Speed Dial number or enter an
Unassigned Speed Dial number in the
Go To
field using
the keypad.
Important!:
Do not enter Speed Call numbers 1, 411, 611, or 911. These numbers
are already assigned to Voicemail (001), to Information (411), to
Customer Care (611), and to emergency use (911).
5. Press
SET
. You are prompted to confirm your Speed Dial
number assignment.
6. Press the
Yes
to save your Speed Dial assignment and
return to the
Add New Entry
screen.
Note:
Press
No
to discard the assignment and return to the
Speed Dial
screen.
7. Press to save your changes.
Changing a Speed Dial Location
1. Find the Contacts entry you want to edit. (For more
information, refer to “Finding a Contacts Entry” on page
33.)
2. Use the Up and Down navigation keys to highlight the
desired entry.
3. Press
Edit
. The
Edit Contact
screen appears in the
display.