Filter
Top Products
Contacts 42
4.
Touch an existing contact, then touch a field to save the
number:
Mobile 1
,
Mobile 2
,
Home
,
Business
, or
Fax
.
5. You can save the contact now, or continue entering fields.
6. When you’re finished, touch to save the contact.
Adding Pauses or Waits
Calls to automated systems can require entry of a password or
account number. You can store the numbers to a Contacts entry,
along with special pause and wait characters.
1. From a Home screen, touch
Contacts
.
2. While entering phone number in a contact entry, enter the
phone number up to the pause or wait, then touch .
3. Touch an option:
• 2. Add 2-Sec Pause
: Stops the dialing sequence for two
seconds, then automatically sends the remaining digits.
A “p” appears in the telephone number.
• 3. Add Wait
: Stops the dialing sequence, waiting for
further input input from you. A “w” appears in the
telephone number.
4. After your entry, touch to save the contact entry.
Note:
Entering multiple pauses extends the length of a pause. For example,
two consecutive pauses equal a total pause of four seconds.
Remember that each pause counts as a digit towards the 48-digit
maximum for telephone numbers.
Finding a Contact
Finding a contact in landscape mode
1. From a Home screen, touch
Contacts
.
2. The cursor appears in the
Search
field. Enter part or all of
the Contact name to see matching entries.
Tip:
You can also find a Contact with
Device Search
. For more information,
see “Device Search” on page 115.
Save
Options
Save
u820.book Page 42 Tuesday, March 9, 2010 6:52 PM