Filter
Top Products
149
3.
Select the parameter you want to edit:
•
Set Name
: enter a profile name.
•
Access Name
: edit the access point name.
•
Auth Type
: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
•
User ID
: enter the User ID required to connect to the network.
•
Password
: enter the user password required to connect to
the network.
•
Protocol
: set the connection protocol used by the WAP browser:
WAP, HTTP, or Other.
•
Home URL
: enter the URL address of the page to use as
your homepage.
•
Proxy address
: MEdia Net set as the proxy server address
and port.
•
Linger Time (Sec.)
: set a time period (in seconds) after which the
network is disconnected if there is no new data traffic.
•
Advanced Settings
: allows you to configure some of the
IP-specific information: Static IP, Static DNS, Server information,
and Traffic Class. Highlight this option and press the Edit soft key to
access the following options:
–
Static IP
: specify if you want to manually enter an IP address. Remove
the check mark if you want the server to automatically assign the IP
address.
–
Local Phone IP
: allows you to configure the local phone IP address.
–
Static DNS
: specify if you want to manually enter the Domain Name
Server (DNS) address.
–
Remove the check mark if you want the server to automatically assign
the address.
–
Server 1/Server 2
: enter the Domain Name Server (DNS) addresses.
–
Traffic Class
: select the traffic class, press the Edit soft key, select a
Traffic Class (Subscribed, Conversation, Streaming, Interactive, or
Background) and press the OK soft key.
Note:
The WAP settings may vary depending on the service provider.
IMS Settings
IMS is the method used to connect to the server and set up the
Video Share option.
•
Service
: allows you to set the IMS service to
On
or
Off
. The default
setting is
On
. If you set the IMS Service to
Off
, you are unable to use
the Video Share option.
•
Profile
: allows you to set the type of server. If you change from the
default AT&T IMS, you may not be able to use Video Sharing.
Note:
Setting the IMS setting to Off may save minutes and memory.
A837.book Page 149 Wednesday, July 23, 2008 3:28 PM