Filter
Top Products
90
•
Help:
provides instructions on how to use voice commands.
•
Restart:
Returns to the Say a Command screen.
Voice Recognition Tips
•
Speak clearly about 3-8 inches from the microphone when giving a command. There is no need to speak slowly or with added
emphasis. The voice recognition software has been optimized to understand speech in its natural form. If it does not recognize
your command after a few seconds, a voice prompt asks you to repeat the command. If it does not recognize your command
again, it issues the voice message “Sorry, command not recognized,” and voice recognition turns off.
•
You must end your current Voice Commands call before you can make another call using Voice Commands. To make a three-way
call, only the first call can be made using Voice Commands.
•
Wait for the tone before you speak.
•
In very noise environments, it may be helpful to use a headset or a Bluetooth headset.
Contacts List Voice Activation
On startup, Nuance reads your Contacts list and voice-activates all the names.
When you add or change contacts, Nuance automatically reloads and voice-activates the list.
Voice recognition examples
The following examples assume that the Mode setting is set to Prompt Mode or Readout Mode (so audio prompts are
provided).
Name Dialing
To use Name Dial, there must be contact information stored in Contacts.
1. In Idle mode, press
Menu
and select Applications Voice recognition.
2. After the voice prompt “Say a Command”, say “
Call
” followed by the first and last name of the contact that you
want to dial.
The name that you said is repeated through the earpiece and your phone dials the number, or if Nuance is not sure of
the name that you said, it asks “Did you say” followed by a name and listens for a response. If you say “
Yes
” the name
repeats and your phone dials the number. If you say “
No
”, Nuance asks again or says “Sorry, Command not
recognized, try again? Say Yes to try again, No to access the options screen (see above).