Filter
Top Products
Receiving a 10-4 Call
1. Make sure your phone’s 10-4 mode is enabled (see “Setting
10-4 Mode” on page 82).
2. When you receive a 10-4 call from a Contacts entry, “10-4
Call,” the entry’s name, and the 10-4 number appear on the
display.
Ⅲ
When you receive a group call, “Group Call”, group
member’s name, and the 10-4 number appear.
3. If the person placing the call has kept the floor (held the ),
you will see the entry name and 10-4 number along with
“has floor.,” and you will hear the caller speaking.
4. When the caller finishes speaking and releases , you will
see “Floor is open.” on the display screen. Press and hold
to take the floor and reply to the caller. (You will see
“You have floor.” and hear a tone confirming that you may
speak.)
5. When the conversation is finished, press .
Note: You can change the volume and the speaker setting while a 10-4
call is activated.
Volume: Adjust the voice volume by using or by
pressing the navigation key up or down (except when you are pressing
and holding ).
Speaker: Switch the speaker on or off by
pressing .
87