Filter
Top Products
My Phone 40
Checking the Sound Data
Select the desired sound as in step 4 in “Playing Back
Sounds” on page 39, then select “File Information”
after pressing [Options].
The file type and size of the selected sound are
displayed. Whether the sound can be copied, forwarded
or saved is also displayed.
To return to the Sound Gallery, press [Back].
Changing the File Name
1.
Perform steps 1 to 3 in “Playing Back Sounds” on
page 39.
2.
Select the file name you wish to change by pressing
or , then press [Options].
The Options Menu is displayed.
3.
Select “Rename”, then press .
4.
Enter a new file name.
To delete the last character, press [Clear]
briefly.
Press and hold [Clear] to clear all characters.
5.
Press .
Note
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, > and . (period).
Tip
• When “Data Edit” is displayed in the menu in step 2,
you are able to edit the sound (p. 50). Once you have
completed editing the newly saved file overwrites the
old file. This new file then becomes the original ring
tone.
Setting the Tone and Strength
1.
Perform steps 1 to 3 in “Playing Back Sounds” on
page 39.
2.
Select the file name you wish to edit by pressing
or , then press [Options].
The Options Menu is displayed.
3.
Press or to select “Tone Set” or “Strength
Set”, then press .
For full details, see pages 48 to 50.
Note
• If “Tone Set” and “Strength Set” are not displayed
in the menu in step 2, you cannot change the settings.