Filter
Top Products
Settings 78
Colour Reduction (M 7-1-5)
The colour of the screen of this phone is automatically
reduced for preventing battery draining if it is not
operated.
You can change the time the Colour Reduction will go
into effect works between 2 and 20 minutes, or disable
this function.
Tip
• When you purchase this phone, the colour reduction
is set to work 2 minutes later.
1.
Perform steps 1 to 3 in “Changing the language” on
page 76.
2.
Press or to select “Colour Reduction”, then
press .
3.
Select “On” to set the colour reduction function on
or “Off” to set it off by pressing or , then
press .
When you select “On” in step 3:
4.
Enter the time until the colour reduction works in
two digits (02 to 20 minutes) using the digit keys,
then press .
Note
• The colour reduction does not work whilst you are
calling or using WAP service.
Setting the Greeting Message (M 7-1-6)
You can set the message which will appear when the
phone is turned on.
1.
Perform steps 1 to 3 in “Changing the Language” on
page 76.
2.
Press or to select “Greeting Message”, then
press .
3.
Press or to select “On”, then press .
4.
Enter the message, then press .
Up to 16 characters can be stored as a message.
For details on entering characters, see “Entering
Characters” on page 23.
Tip
• To cancel the Greeting Message setting, select “Off”
in step 3.
Assign Images (M 7-1-7)
Images can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Images taken by a digital camera or downloaded from a
WAP site can be used.