Filter
Top Products
This is the Internet version of the user's guide. © Print only for private use.
38
Push to Talk (PTT)
PTT calls
To make a PTT call
1 Press to access the PTT contacts list.
2 Select the contact or group you want to call.
Make sure the contact/group shows Available
(
/ ) or Silent/Vibrate ( / ).
3 Press to activate the call. After the tone
sounds you have the floor and may begin
speaking.
4 Hold the PTT key down while speaking.
Release it when you are not.
5 To end the PTT session, turn off the speaker
and close the phone or press
More } End Call.
You will be automatically disconnected if there
is no activity for 30 seconds.
To receive a PTT call
1 For the best results, set your ringer to the highest
volume setting.
2 If your status is available, a tone signals an
incoming PTT call. The caller’s information
appears on the screen and you automatically
hear the caller’s voice.
3 When the phone is in silent mode, the caller’s
information appears. A vibrating alert replaces
the tone. You must manually accept the PTT
call when the phone is in silent mode.
• Answer – transfers the caller’s voice to the
ear speaker.
• Busy – ends the call. PTT calls are not
forwarded to voicemail.
To end a PTT call
Either wait for the call to time out from inactivity
or press End Call.
To make a Quick Group Call
Make a PTT group call without previously
creating a PTT group.
1 } to access your contact list.
2 Highlight the first member of the Quick Group.
3 Press Mark to select group members from
the list.
4 Press Continue.
5 Press and hold to call.
• Leave a voicemail for the Quick Group.
• Save the Quick Group.
If the clamshell is closed, the Contacts screen appears
on the external display. Use the volume keys to scroll
through the list.