Filter
Top Products
3A. Sprint Service: The Basics 99
Sprint Basics
2. Press ON or OFF (left softkey).
Note: Call Guard is turned on by default on your phone.
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the
seven-digit number and press
.
2. press CONTINUE (left softkey) or .
To answer incoming roaming calls with Call Guard on:
1. Press . (A message will be displayed notifying
you that roaming charges will apply.)
2. press CONTINUE (left softkey) or .
Note: If the Call Guard feature is set to On, you need to take
extra steps to make and receive roaming calls.
Data Roam Guard
Depending on service availability and roaming
agreements, your phone may be able to access data
services while roaming on certain digital systems. You
can set your phone to alert you when you are roaming
off the Nationwide Sprint Network and try to use data
services such as messaging.
Note: Data Roam Guard is turned on by default on your
phone.
To set your Data Roam Guard notification:
1. Press > Settings > Others > Roaming > Data
Roam Guard.
2. Press ON (left softkey) to set your phone’s Data
Roam Guard feature on. You will see a prompt and
will be required to respond anytime you access
data services while roaming.
– or –
Press
OFF (left softkey) to turn your phone’s Data
Roam Guard feature off. You will not be notified of
your roaming status when accessing data services.
To use data services when Data Roam Guard is active:
ᮣ When a pop-up notification appears informing you
that data roam charges may apply, press
ROAM
(left softkey) to connect.
Voice dialing and speed dialing are not available when
you are roaming with Call Guard enabled.