Filter
Top Products
26 2A. Phone Basics
that you have dialed the number when it shows
“Connecting...”.
To use Two-Touch Dialing for speed dial
locations 10–99:
1. Press the first digit.
2. Press and hold the second digit for approximately
two seconds. The display confirms that you have
dialed the number when it shows “Connecting...”.
Note: Speed dialing is not available when you are roaming;
when you are roaming off the Nationwide Sprint
Network, you must always dial using eleven digits
(1 + area code + number).
Plus (+) Code Dialing
When placing international calls, Plus Code Dialing
automatically enters the international access code for
your location (for example, 011 for international calls
made from the U.S.).
1. Press and hold until you see a “+” on the
display screen.
2. Dial the country code and phone number, and
then press
. (The phone automatically
prepends the access code for international dialing,
follo
wed by the country code and phone number.)
Entering Text
Selecting a Text Input Mode
Your phone provides convenient ways to enter letters,
numbers, and symbols whenever you are prompted to
enter text (for example, when adding a Contacts entry
or when using email and text messaging).
1. From a screen where you can enter text, press
OPTIONS (right softkey) and select Text Mode to
change the text input mode.
2. Select one of the following options:
Ⅲ Predictive Text to enter text using a predictive text-
entry system that reduces the number of
keystrokes required to enter a word. (See
page 27.)
Ⅲ Symbols to enter symbols. (See page 29.)
Ⅲ Smileys to enter “emoticons.” (See page 29.)
Ⅲ Settings to select text settings. (See page 28.)