UTStarcom CDM1450 Cell Phone User Manual


 
70 71
2.
Press Settings.
3.
Press Left Soft Key [Save] to save the settings.
SUPPORT SERVICE
1.
Press Left Soft Key [Menu], then press Settings.
Press Bluetooth.
2.
Press Support service.
INFORMATION
1.
Press Left Soft Key [Menu], then press Settings.
Press Bluetooth.
2.
Press Information.
3.
View information. To return preview to the previous page,
press Right Soft Key [Close].
SECURITY
Use these settings to prevent unauthorized use of your phone.
HANDSET LOCK
Turn on the lock to prevent the phone from being used without entering
the password first.
1.
Press Left Soft Key [Menu], then press Settings.
Press Security. Enter your password.
2.
Press Handset lock.
3.
Highlight Off, When switch on, or Immediately then
press Left Soft Key [Select] to save the setting.
KEY LOCK
To set Key Lock:
1.
Press Left Soft Key [Menu], then press Settings.
Press Security. Enter your password.
2.
Press Key lock.
3.
Highlight Off, 20sec, 30sec 1min or 3min then
press Left Soft Key [Select] to save the setting.
SETTINGSSETTINGS
Headset serivce: This is providing support for the popular Bluetooth headsets
to be used with mobile phones. When connected and
configured, the headset can act as the remote device an
audio input and output interface.
Hand free service: This is used to allow car hands-free kits to communicate
with mobile phones in the car. In the car, the stereo is used
for the phone audio and a microphone is installed in the
car for sending outgoing audio.
The default password is the last 4 digits of your phone number.
The default password is the last 4 digits of your phone number.
Off: Do not lock the handset.
When switch on: Lock the phone when switch on.
Immediately: Lock the phone now.
Set Bluetooth: Turn Bluetooth on or off.
Handsets Visibility: Select Hidden or Shown to all.
Handsets Name: Edit the name of the device.
071012_1450M-EN_REV01.indd 70-71071012_1450M-EN_REV01.indd 70-71 2007.12.17 10:21:3 AM2007.12.17 10:21:3 AM