Adding and Replacing Parts 155
11
Adding and Replacing Parts
Before You Begin
This chapter provides procedures for removing and installing the components
in your Tablet-PC. Unless otherwise noted, each procedure assumes the
following:
• You have performed the steps in "Turning Off Your Tablet-PC" on page 155
and "Before Working Inside Your Tablet-PC" on page 156.
• You have read the safety information in the Dell™
Product Information
Guide.
Recommended Tools
The procedures in this document may require the following tools:
• Small flat-blade screwdriver
•#0 Phillips screwdriver
•#1 Phillips screwdriver
• Small plastic scribe
• Flash BIOS update program CD
Turning Off Your Tablet-PC
NOTICE: To avoid losing data, save and close all open files and exit all open
programs before you turn off your Tablet-PC.
1
Shut down the operating system:
•
In Windows Vista:
Click
Start
,
then click the arrow in the lower-right corner of the
Start
menu as shown below, and then click
Shut Down
.
book.book Page 155 Tuesday, May 13, 2008 5:03 PM
