A SERVICE OF

logo

196 Adding and Replacing Parts
4
Remove the keyboard (see "Removing the Keyboard" on page 176).
5
Remove any installed Mini-Cards (see "Removing a Mini-Card" on
page 171).
6
Remove the palm rest (see "Removing the Palm Rest" on page 186).
7
Remove the system board (see "Removing the System Board" on
page 189).
8
Remove the M2.5 x 5-mm screw.
9
Lift the wireless switch from the base, and set the switch aside.
1 base 2 M2.5 x 5-mm screw
1
2
book.book Page 196 Tuesday, May 13, 2008 5:03 PM