Media Base (Optional) 212
3
Press the Tablet-PC onto the media base until it clicks and the Tablet-PC
is firmly seated.
4
Turn on the Tablet-PC.
The operating system recognizes the media base.
Undocking Your Tablet-PC From the Media Base
NOTICE: Never undock the Tablet-PC without first preparing the Tablet-PC for
undocking. If you undock before preparing the Tablet-PC, you will lose data and the
Tablet-PC may not recover normal operation for several minutes, if at all.
1
Before you undock your Tablet-PC, save and close any open files, and exit
any open programs.
2
Set your Tablet-PC power management settings so that the Tablet-PC
does not enter sleep, standby, or hibernate mode when you close (lower)
the display:
a
Click the Windows
Power
icon
in the Notification area to display
the
Power
icon pop-up window.
b
Click
More power options
.
c
Under the
When I close the lid
drop-down menu, select
Do nothing.
NOTICE: If the Tablet-PC does not have a charged battery in the battery bay, you
must shut down the Tablet-PC through the Windows Start menu and then undock
the Tablet-PC. If you undock the Tablet-PC without a battery before shutting it down,
you will lose data and the Tablet-PC may not recover normal operation for several
minutes, if at all.
3
If your media base is secured, remove the lock.
4
Remove the AC adapter connector from the media base
5
Pull the Tablet-PC release lever forward (see "Right View" on page 204) to
release the Tablet-PC from the media base.
book.book Page 212 Tuesday, May 13, 2008 5:03 PM
