• Advanced lets you connect to computers over a wireless network
access point.
When switching the connection mode, follow the on-screen
instructions to save your settings. After saving the settings, the
Network menu appears.
i
Select the SSID and IP Settings as necessary for your network.
• If you assign an SSID automatically to speed up the projector
search, set the SSID Auto Setting setting to On. Otherwise, select
SSID to enter the projector's SSID.
• If your network assigns addresses automatically, select IP Settings
to set the DHCP setting to On.
• If you must set addresses manually, select IP Settings to set the
DHCP setting to Off and enter the projector's IP Address, Subnet
Mask, and Gateway Address as necessary.
j
To prevent the SSID or IP address from being displayed on the
standby screen, set the SSID Display setting or the IP Address
Display setting to Off.
k
When you finish selecting settings, selectComplete and follow the
on-screen instructions to save your settings and exit the menus.
When you have finished making wireless settings for your projector, you
need to select the wireless network on your computer.
Related Links
• "Wireless Network Projection" p.102
Searching for a Wireless Network
You can use your projector's site survey function to quickly locate and
connect to available wireless networks.
a
Press the [Menu] button on the control panel or remote control.
b
Select the Network menu and press [Enter].
c
Select Network Configuration and press [Enter].
d
Select the Wireless LAN menu and press [Enter].
Wireless Network Projection
106
