• To prevent changes to network settings, select On as the Network
Protection setting.
• To prevent changes to the projector's time or schedule settings, select
On as the Time/Schedule Protection setting.
You can attach the password protect sticker to the projector as an
additional theft deterrent.
a
Be sure to keep the remote control in a safe place; if you lose it, you
will not be able to enter the password.
Related Links
• "Password Security Types" p.93
Entering a Password to Use the Projector
When the password screen is displayed, enter the correct password.
a
Hold down the [Num] button on the remote control while you
enter the password using the numeric buttons.
The password screen closes.
b
If the password is incorrect, you see a message and a prompt to
try again. Enter the correct password to proceed.
Attention
• If an incorrect password is entered three times in succession, the
message "The projector's operation will be locked." is displayed for
approximately 5 minutes, and the projector switches to standby mode.
If this happens, disconnect the power plug from the electrical outlet,
reinsert it, and turn the projector back on. The projector displays the
password entry screen again so that you can enter the correct
password.
• If you have forgotten the password, make a note of the "Request
Code: xxxxx" number that appears on the screen and contact Epson
for help.
• If you continue to repeat the above operation and input the wrong
password 30 times in succession, the message "The projector's
operation will be locked. Contact Epson as described in your
documentation." is displayed and the projector does not accept any
more password entries. Contact Epson for help.
Related Links
• "Password Security Types" p.93
Projector Security Features
95
