You can temporarily turn off the projected image and sound if you want to
redirect your audience's attention during a presentation. Any sound or
video action continues to run, however, so you cannot resume projection at
the point that you stopped it.
a
If you want to display an image such as a company logo or picture
when the [A/V Mute] button is pressed, you can select the screen
displayed in the A/V Mute setting in the projector's Extended menu.
s Extended > Display > A/V Mute
a
Press the [A/V Mute] button on the remote control to temporarily
stop projection and mute any sound.
b
To turn the image and sound back on, press [A/V Mute] again.
a
• You can also stop projection using the A/V Mute slide lever on the
projector.
• The projector's power automatically turns off 30 minutes after A/V
Mute is enabled. You can disable this feature in the projector's ECO
menu.
s ECO > Lens Cover Timer
s ECO > A/V Mute Timer
• The lamp is still operating during A/V Mute, so the lamp hours
continue to accumulate.
Related Links
• "Adjusting Projector Features" p.69
• "Projector Setup Settings - Extended Menu" p.139
• "Projector Setup Settings - ECO Menu" p.150
Shutting Off the Image and Sound Temporarily
81
