g
Turn off the projector, and then turn it on again to enable the
setting.
Related Links
• "Crestron RoomView Support" p.125
Controlling a Networked Projector Using Crestron
RoomView
Once you have set up your projector to use Crestron RoomView, you can
control and monitor projection using a compatible Web browser.
a
Start your Web browser on a computer connected to the network.
b
Type the projector's IP address into the browser's address box and
press the computer's Enter key.
You see this screen:
c
Select the input source that you want to control in the Sources
List box. You can scroll through available sources using the up
and down arrows in the box.
d
To control projection remotely, click the on-screen buttons that
correspond to the projector's remote control buttons. You can
scroll through button options at the bottom of the screen.
a
These on-screen buttons do not directly correspond to the
projector's remote control buttons:
• OK acts as the [Enter] button
• Menu displays the projector's menu
e
To view information about the projector, click the Info tab.
f
To change the projector, Crestron, and password settings, click the
Tools tab, select settings on the displayed screen, and then click
Send.
g
When you finish selecting settings, click Exit to exit the program.
Related Links
• "Crestron RoomView Support" p.125
• "Crestron RoomView Operation Window" p.126
• "Crestron RoomView Tools Window" p.127
Crestron RoomView Operation Window
Settings on the operation window let you control the projector and adjust
the projection image.
Crestron RoomView Support
126
