Setting Options Description
Input Signal Auto
RGB
Component
Specifies the signal type from input
sources connected to computer ports.
Auto: detects signals automatically.
RGB: corrects color for computer/RGB
video inputs.
Component: corrects color for compo‐
nent video inputs.
Video Signal Auto
NTSC
NTSC4.43
PAL
M-PAL
N-PAL
PAL60
SECAM
Specifies the signal type from the input
sources connected to the video ports.
Auto: detects signals automatically.
If interference appears or no image
appears when set to Auto, select the
appropriate signal according to the
connected equipment.
Aspect See the list of
available aspect ra‐
tios
Sets the aspect ratio (width-to-height
ratio) for the selected input source.
Overscan
(For component
video and RGB
video signal input)
Auto
Off
4%
8%
Changes the projected image ratio to
make the edges visible by a selectable
percentage or automatically.
Image Processing Fine
Fast
Adjusts image processing speed/quality.
Fast: increases image processing speed.
Fine: increases image quality.
Reset — Resets all adjustment values on the
Signal menu to their default settings,
except for Input Signal and Image
Processing.
a
You cannot select the Noise Reduction setting when the following are
being input.
• The Image Processing setting is set to Fast.
• The Progressive setting is set to Off.
• A digital RGB signal is being input.
• An interlaced signal (480i/576i/1080i) is being input.
Related Links
• "Adjusting the Menu Settings" p.131
• "Available Image Aspect Ratios" p.59
Input Signal Settings - Signal Menu
136
