Setting Options Description
IP Settings DHCP
IP Address
Subnet Mask
Gateway Address
DHCP: set to On if your network
assigns addresses automatically; set to
Off to manually enter the network's IP
Address, Subnet Mask, and Gateway
Address using 0 to 255 for each ad‐
dress field.
Do not use these addresses: 0.0.0.0,
127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address and
Gateway Address and 0.0.0.0 and
255.255.255.255 for Subnet Mask.
IP Address Dis‐
play
On
Off
Select whether to display the IP address
on the network standby screen.
Related Links
• "Projector Network Settings - Network Menu" p.142
Network Menu - Mail Menu
Settings on the Mail menu let you receive an email notification if a problem
or warning occurs in the projector.
s Network > Network Configuration > Mail
Setting Options Description
Mail Notification On
Off
Set to On to send an email to the
preset addresses when a problem or
warning occurs with a projector.
SMTP Server IP address Enter the IP address for the projector's
SMTP server using 0 to 255 for each
address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Port Number 1 to 65535 (de‐
fault is 25)
Select a number for the SMTP server
Port Number.
Address 1 Setting
Address 2 Setting
Address 3 Setting
Up to 32 alphanu‐
meric characters
Enter the e-mail address, and select the
alerts you want to receive. Repeat for
up to 3 addresses.
Related Links
• "Projector Network Settings - Network Menu" p.142
Projector Network Settings - Network Menu
147
