A SERVICE OF

logo

947
Chapter 48 Clock Monitor
8.Caution
8. Caution
Due to the glitch free switching mechanism it is necessary to follow these rules when switching the clock
source (CMCFG3:0) or the prescaler ratio (CMPRE3:0):
- The CMPRE3:0 registers can only be written if the CMCFG3:0 registers are currently 0x0.
- The CMPRE3:0 registers can only be written if the CMCFG3:0 registers are written to 0x0 within the same
write access.
- Between 2 write accesses to CMPRE/CMCFG there must be at least 2 cycles of the divided monitor clock.