A SERVICE OF

logo

Open as PDF
next previous
ES-4024A User’s Guide
208 Chapter 37 Introducing the Commands
Figure 134 CLI: History Command Example
37.8 Saving Your Configuration
After you set the switch settings with the configuration commands, use the write memory
command to save the changes permanently.
Figure 135 CLI: write memory
Note: The write memory command is not available in User mode.
You must save your changes after each CLI session. All unsaved configuration
changes are lost once you restart the switch.
37.8.1 Logging Out
In User mode, enter the exit or logout command to log out of the CLI.
37.9 Command Summary
The following sections summarize the commands available in the switch together with a brief
description of each command. Commands listed in the tables are in the same order as they are
displayed in the CLI. See the related section in the User’s Guide for more background
information.
ras> history
enable
exit
show ip
history
ras>
ras# write memory