ES-4024A User’s Guide
Chapter 37 Introducing the Commands 209
37.9.1 User Mode
The following table describes the commands available for User mode.
37.9.2 Enable Mode
The following table describes the commands available for Enable mode.
Table 82 Command Summary: User Mode
COMMAND DESCRIPTION
enable
Accesses Enable (or privileged) mode. See Section 37.9.2
on page 209.
exit
Logs out from the CLI.
help
Displays help information.
history
Displays a list of previously command(s) that you have
executed. The switch stores up to 256 commands in
history.
logout
Exits from the CLI.
ping <IP|host-name>
Sends a Ping request to an Ethernet device.
show hardware-monitor <C|F>
Displays current hardware monitor information with the
specified temperature unit (Celsius C or Fahrenheit F).
system-information
Displays general system information.
traceroute <ip|host-name>
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device.
Table 83 Command Summary: Enable Mode
COMMAND DESCRIPTION
baudrate <1|2|3|4|5>
Changes the console port speed. Choices
are 1 (9600), 2 (19200), 3(38400), 4
(57600) and 5 (115200).
boot
Restarts the switch.
configure
Accesses Configuration mode. See
Section 37.9.3 on page 212.
disable
Exits Enable (or privileged) mode.
enable
Accesses Enable (or privileged) mode.
erase running-config
Resets to the factory default settings.
exit
Exits Enable (or privileged) mode.
help
Displays help information.
history
Displays a list of command(s) that you
have previously executed.
logout
Exits Enable (or privileged) mode.
