ES-4024A User’s Guide
216 Chapter 37 Introducing the Commands
mode zynos
Changes the CLI mode to the
ZyNOS format.
no bandwidth-control
Disable bandwidth control on
the switch.
broadcast-storm-
control
Disables broadcast storm
control on the switch.
classifier <name>
Disables the classifier. Each
classifier has one rule.
If you disable a classifier you
cannot use rule related
information.
inactive
Enables a classifier.
cluster
Disables cluster management
on the switch.
member <mac-
address>
Removes the cluster member.
dhcp relay
Disables DHCP relay.
server <vlan-id>
Disables DHCP server settings.
server default-
gateway
Disables DHCP server default
gateway settings.
server primary-
dns
Disables DHCP primary DNS
server settings.
server secondary-
gateway
Disables DHCP server
secondary gateway settings.
diffserv
Disables the DiffServ settings.
filter classifier
<classifier-name>
Disables filtering (traffic
blocking) for a classifier.
inactive
Enables filtering (traffic
blocking) for a classifier.
igmp-snooping
Disables IGMP snooping.
ip route <ip> <mask>
Removes a specified IP static
route.
inactive
Enables a specified IP static
route.
lacp
Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
logins <name>
Disables login access to the
specified name.
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
