ES-4024A User’s Guide
Chapter 37 Introducing the Commands 219
area <area-id>
authentication
message-digest
Enables MD5 authentication for
the area.
area <area-id>
default-cost <0-
65535>
Sets the cost to the area.
area <area-id>
name <name>
Sets a descriptive name for the
area for identification purposes.
area <area-id>
stub
Enables and sets the area as a
stub area.
area <area-id>
stub no-summary
Sets the stub area not to send
any LSA (Link State
Advertisement).
area <area-id>
virtual-link
<router-id>
Sets the virtual link ID
information for the area.
area <area-id>
virtual-link
<router-id>
authentication-
key <key>
Enables simple authentication
and sets the authentication key
for the specified virtual link in
the area.
area <area-id>
virtual-link
<router-id>
authentication-
same-as-area
Sets the virtual link to use the
same authentication method as
the area.
area <area-id>
virtual-link
<router-id>
message-digest-
key <keyid> md5
<key>
Enables MD5 authentication
and sets the key ID and key for
the virtual link in the area.
area <area-id>
virtual-link
<router-id> name
<name>
Sets a descriptive name for the
virtual link for identification
purposes.
exit
Leaves the router OSPF
configuration mode.
network <ip-addr/
bits> area <area-
id>
Creates an OSPF area.
no area <area-id>
Removes the specified area.
no area <area-id>
authentication
Sets the area to use no
authentication (None).
no area <area-id>
default-cost
Sets the area to use the default
cost (15).
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
