VES-1616F-3x Series User’s Guide
169
CHAPTER 25
Maintenance
This chapter explains how to configure the maintenance screens that let you maintain the
firmware and configuration files.
25.1 The Maintenance Screen
The maintenance screens can allow you to upload new firmware (to the switch), manage
configuration, reset to factory defaults and restart your switch.
Click Management > Maintenance in the navigation panel to open the screen as shown next.
Figure 72 Maintenance
The following table describes the links in this screen.
Table 58 Maintenance
LINK DESCRIPTION
Remote Device
Upgrade
Access this screen to perform remote firmware upgrade on the connected non-
manageble CPE device(s).
VDSL Chip Reset Access this screen to reset the VDSL chip(s) on this switch.
Remote Device
Reset
Access this screen to reset the VDSL link(s) to the CPE device(s).
Firmware Upgrade Access this screen to upload a new firmware to this switch.
Restore
Configuration
Access this screen to upload a previously saved configuration file to the switch.
Backup
Configuration
Access this screen to back up the current switch configuration.
