Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
226
bcp-transparency Disables Bridge Control
Protocol (BCP) transparency.
13
classifier <name> Disables the classifier. Each
classifier has one rule.
If you disable a classifier you
cannot use policy rule related
information.
13
inactive Enables a classifier. 13
cluster Disables cluster management
on the switch.
13
member <mac-
address>
Removes the cluster member. 13
dhcp-relay Disables DHCP relay. 13
information Disables the relay agent
information option 82.
13
option System name is not appended
to option 82 information field.
13
diffserv Disables the DiffServ settings. 13
https timeout Resets the session timeout to
the default of 300 seconds.
13
igmp-filtering Disables IGMP filtering on the
switch.
13
profile <name> Disables the specified IGMP
filtering profile.
13
profile <name>
start-address <ip>
end-address <ip>
Clears the settings of the
specified IGMP filtering profile.
13
igmp-snooping Disables IGMP snooping on
the switch.
13
8021p-priority Disables 8021p-priority
change in the outgoing IGMP
control packets.
13
ip Disables management. 13
ip route <ip> <mask> Removes a specified IP static
route.
13
inactive Enables a specified IP static
route.
13
lacp Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
13
logins username <name> Disables login access for the
specified account name.
14
mac-filter name <name>
mac <mac-addr> vlan
<vlan-id>
Disables the specified MAC
filter rule.
13
inactive Enables the specified MAC-
filter rule.
13
Table 81 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION P
