Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
220
igmp-filtering profile Displays IGMP filtering profile
settings.
13
igmp-snooping Displays global IGMP snooping
settings.
13
interfaces <port-
number>
Displays current interface status. 13
interfaces config
<port-list>
Displays current interface
configuration.
13
bandwidth-control Displays bandwidth control settings. 13
bstorm-control Displays broadcast storm control
settings.
13
egress Displays outgoing port information. 13
igmp-filtering Displays IGMP filtering settings. 13
igmp-group-
limited
Displays the IGMP group limit. 13
imgp-immediate-
leave
Displays the IGMP Immediate Leave
setting.
13
igmp-query-mode Displays IGMP query mode settings. 13
protocol-based-
vlan
Displays protocol-based VLAN
settings.
13
ip Displays IP related information. 13
arp Displays the ARP table. 13
route Displays IP routing information. 13
route static Displays IP static route information. 13
tcp Displays IP TCP status. 13
udp Displays UDP status. 13
lacp Displays LACP (Link Aggregation
Control Protocol) settings.
13
logging Clears system logs. 13
loginPrecedence Displays login precedence settings. 13
logins Displays login account information. 13
mac address-table all <sort> Displays MAC address table.
sort = mac, vid or port.
13
count Displays the count of the MAC
addresses stored in the MAC address
table.
13
static Displays static MAC address table. 13
mac-aging-time Displays MAC learning aging time. 13
multicast Displays multicast settings. 13
multi-login Displays multi-login information 13
mvr DIsplays all MVR (Multicast VLAN
Registration) settings.
13
Table 80 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION P
