Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
216
32.9 Using Command History
The switch keeps a list of command(s) you have entered for the current CLI session. You can
use any commands in the history again by pressing the up (y) or down (z) arrow key to scroll
through the previously used commands and press
[ENTER]. Use the history command to display
the list of commands.
Config-interface This is a sub-mode of the config mode
and allows you to configure port
related settings.
Type interface
port-channel
followed by a port
number. For example,
i
nterface port-
channel 10
to
configure port 10 on
the switch.
sysname(config-
interface)#
Config-mvr This is a sub-mode of the config mode
and allows you to configure multicast
VLAN settings.
To enter MVR mode,
enter
mvr followed by
a VLAN ID (between 1
and 4094). For
example, enter
mvr 2
to configure multicast
settings on VLAN 2.
sysname(config-mvr)#
config-vdsl-
alarmprofile
This is a sub-mode of the config mode
and allows you to configure VDSL
alarm profiles..
Type
vlan-
alarmprofile
followed by a profile
name. For example,
vdsl-
alarmprofile
test
.
sysname(config-
vdslalarmprofile)#
config-vdsl-profile This is a sub-mode of the config mode
and allows you to configure VDSL
profiles.
Type vlan-
profile
followed by
a profile name. For
example, vdsl-
profile
standard
.
sysname(config-
vdslprofile)#
Config-vlan This is a sub-mode of the config mode
and allows you to configure VLAN
settings.
Type vlan followed
by a number (between
1 and 4094). For
example,
vlan 10 to
configure settings for
VLAN 10.
sysname(config-vlan)#
Table 78 Command Interpreter Mode Summary (continued)
MODE .DESCRIPTION
HOW TO LOGIN/
ACCESS
PROMPT
sysname> history
enable
exit
history
sysname>
