Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
225
default-gateway
<ip>
Sets the default gateway’s IP
address.
13
name-server <ip> Sets the IP address of a
domain name server.
13
route<ip> <mask>
<next-hop-ip>
Creates a static route. 13
[metric <metric>]
[name <name>]
[inactive]
Sets the metric of a static route
or deactivates a static route.
13
lacp Enables Link Aggregation
Control Protocol (LACP).
13
system-priority <1-65535> Sets the priority of an active
port using LACP.
13
loginPreceden
ce
<LocalOnly |
LocalRADIUS |
RADIUSOnly>
Select which database the
switch should use (first) to
authenticate a user.
14
logins
username <name>
password <pwd>
Configures up to four read-only login accounts.
14
privilege <0-14> Sets the access privilege for
the existing login accounts.
The higher the value, the more
commands are allowed.
14
logout Exits from the CLI. 13
mac-aging-
time
<10-3000> Sets learned MAC aging time. 13
mac-filter name <name> mac <mac-
addr> vlan <vlan-id>
drop <src/dst/both>
Configures a static MAC
address port filtering rule.
13
inactive Disables a static MAC address
port filtering rule.
13
mac-forward name <name> mac <mac-
addr> vlan <vlan-id>
interface <interface-
id>
Configures a static MAC
address forwarding rule.
13
inactive Disables a static MAC address
forwarding rule.
13
mirror-port Enables port mirroring. 13
<port-num> Sets a monitor port. 13
mode zynos Changes the CLI mode to the
ZyNOS format.
13
multi-login Enables multi-login. 14
mvr <vlan-id> Enters the MVR (Multicast
VLAN Registration)
configuration mode.
See Section 32.11.5 on page
236 for more information.
13
no bandwidth-control Disable bandwidth control on
the switch.
13
Table 81 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION P
