Chapter 4 The Web Configurator
VES-1616F-3x Series User’s Guide
50
4.3.1 Change Your Password
After you log in for the first time, it is recommended you change the default administrator
password. Click Management > Access Control > Logins to display the next screen.
Figure 12 Change Administrator Login Password
4.4 Switch Lockout
You are locked out from managing the switch if another administrator is currently logged in.
You must wait until he/she has logged out before you can log in.
Any of the following could also lock you and others out from using in-band management
(managing through the data ports).
Moreover, you could lock yourself (and all others) out from the switch by:
1 Deleting the management VLAN (default is VLAN 1).
Maintenance This link takes you to screens where you can perform firmware and configuration
file maintenance as well as reboot the system.
Access Control This link takes you to screens where you can change the system login password
and configure SNMP and remote management.
Diagnostic This link takes you to screens where you can view system logs and test port(s).
Syslog This link takes you to screens where you can enable syslog logging and configure
syslog server settings.
Cluster
Management
This link takes you to a screen where you can configure clustering management
and view its status.
MAC Table This link takes you to a screen where you can view the MAC addresses (and types)
of devices attached to what ports and VLAN IDs.
ARP Table This link takes you to a screen where you can view the MAC addresses – IP
address resolution table.
Table 5 Navigation Panel Links (continued)
LINK DESCRIPTION
