Filter
Top Products
Controlling Roaming Charges Using
Call Guard
In addition to the roaming icon, Call Guard alerts you when roaming
charges apply. This feature makes it easy to manage your roaming
charges by reminding you when you make or receive roaming calls.
It also requires you to take an additional step before placing or
answering a roaming call. This additional step is not required when
you make or receive calls while on the enhanced Sprint Nationwide
PCS Network.
To turn Call Guard on or off:
1. Press (Menu) to access the main menu.
2. Select Settings ().
3. Select Roaming ().
4. Select Call Guard ().
5. Read the message, and press .
6. Select On or Off then press .
Note: Voice Dialing and Speed Dialing are not available when you are
roaming with Call Guard enabled.
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the seven-digit number
and press . (You can also initiate a call from the Internal
Phone Book, Call History, or Messaging.)
2. Read the message, and press .
3. Select Yes or No then press .
To answer incoming roaming calls with Call Guard on:
1. Press . (A message will appear notifying you that roaming
charges will apply.)
2. Read the message, and press .
3. Select Yes or No then press .
Remember, if the Call Guard feature is set to On, you need to take
extra steps to make and receive roaming calls even if you have
selected the Analog setting (see page 47).
Section 2: Understanding Your PCS Phone
2D: Controlling Your Roaming Experience 48