Filter
Top Products
38
The Send All Calls feature temporarily sends all your calls to your voice mail
system or to another extension in the same system. Note that priority calls
and automatic callbacks are not redirected by the Send All Calls feature.
Note: Before you can use this feature, your system manager must provide a
coverage path for your extension.
To send all calls (except priority calls) and automatic callbacks
immediately to coverage
1. Press the button (while on-hook) or Dial the Send All Calls
access code (while off-hook)
2. Listen for confirmation tone.
Note: You hear confirmation tone only when you use a feature access
code.
To cancel Send All Calls
1. Press the button again (while on-hook) or Dial the Send All
Calls cancel code (while off-hook).
2. Listen for confirmation tone.
The Whisper Page feature allows you, if you have appropriate permissions, to
make an announcement to a person at another extension currently on
another call. Only the person at the other extension hears the
announcement; the other person on the call cannot hear the message.
To make an important announcement (such as an incoming call) to
someone at another extension busy on another call
1. Press the button or Dial the Whisper Page access code.
Both people on the other call hear a beep.
The person whom you have called can press the button
which forms a two-party speaking path with your telephone. The other
call is put on hold and that person cannot hear your conversation.
2. Speak with the person you have called.
Note: If the person whom you have called is not using the telephone at
the time you activate Whisper Page, the call is converted to a
normal call.
Note: Any person in the system with the button
administered on the telephone can block Whisper Page calls by
pressing the button.
Send All Calls
Whisper Page
Send Calls
Send Calls
Whisper Page
Whisper Answer
Whisper Answer
Whisper Off