Ericsson SH888 Cell Phone User Manual


 
Scroll to ‘Cost’, using the navigation key, and
press YES.
To exit to standby mode, press CLR.
From the ‘Info’ menu, select ‘Price Units’ and
press YES. ‘New Price’ appears.
Press YES.
Enter the code for the desired currency, for
example GBP for Pound Sterling, and press YES.
Enter the price per call unit, for example 0.5,
and press
YES. To enter the decimal point, press
#.
Enter your PIN2. (The PIN2 prompt may not
appear in some networks.)
To Revert to Displaying Call Units
From the ‘Info’ menu, select ‘Price’.
To select the ‘Units’ option, press YES.
To revert to displaying call units, press YES.
To Set a Credit Limit for Calls
Provided both your network and your SIM card support
this feature, you can enter a total amount ofmoney that
can be used for makingcalls. This could beuseful when
you, for example, lend your phone to someone, and do
not want their call costs to exceed an amount specified
by you. After a call is made, the cost is deducted from
this amount. When the amount reaches zero, no more
calls can be made.
From the ‘Info’ menu, select ‘Credit’.
To select ‘New credit’, press YES.
Enter the amount: for example, 30 pounds.
Press YES.
Enter your PIN2.
Press YES.
The Two Line Service
Two voice lines with different phone numbers, Line 1
and Line 2, may beassigned to your phone.This is use-
ful if you, for example, want to have one number for
yourbusiness calls and one for your private. The ability
to receive and send text messages (SMS), is only
available on Line 1.
The Two Line service(also called AlternateLine Service,
ALS) may not be available on all networks and may
require a separate subscription.
Selecting a Line
The line currently selected is indicated in the display
with the letter ‘L’ and a digit. For example, if line two is
selected, you will see ‘L2’ in the display.
To change to the line that is not currently selected:
Scroll to the ‘Change to’ menu.
To change to the line displayed in the bottom
row, press
YES.
From now on, all outgoing calls are made on the
selected line. You can, however, receive calls on both
lines.
Note! Instead of accessing the menu system, you can press
and hold the 2 key to change line, provided the phone
is in standby mode. Clear the display first, using the
CLR key.
Receiving a Call on Line 1 or Line 2
When someone calls you, the question ‘Answer?’ is
replaced by ‘Line1?’ or ‘Line2?’ depending on which line
you have selected.
Note! If you are engaged in a call on one line, you must end
thatcall first before answering the call on the otherline.
54 Press to enter the menu system. See inside the cover.