Filter
Top Products
34 Getting Started
Connections tab
Icon Description
Beam Enables your device to receive incoming infrared and Bluetooth
beams.
Bluetooth Turns Bluetooth on, sets your device to visible mode, and
allows you to scan for other Bluetooth devices.
Comm Manager
Allows you to manage the device’s connection (including
Wi-Fi, Bluetooth, Beam, and ActiveSync), disconnect data services (such as
GPRS), turn the phone on or off, switch to ringer/vibration mode, switch to
flight mode, and enable or disable the Direct Push function
.
Connections Sets up one or more types of modem connections for your
device, such as phone dial-up, GPRS, Bluetooth, and more, so that your
device can connect to the Internet or a private local network.
CSD Line Type Sets the line type to use when making a circuit switch
data (CSD) connection. Normally, you do not need to change the setting
unless you encounter a problem on establishing a connection.
GPRS Setting Sets the GPRS authentication method. Consult your
wireless service provider first before changing this setting.
USB to PC Sets the USB connection between your device and PC, and
helps with problems connecting ActiveSync.
Wi-Fi Allows your device to scan for available wireless networks. Also
allows you to set up a network card (if you have one inserted on your
device).
Wireless LAN Shows information about the active wireless network, and
allows you to customize Wi-Fi settings.