Filter
Top Products
User Guide 5
Phone Battery
Install the Battery
To install the battery:
1. Hold the phone face
down.
2. Find the notch
directly below the
back cover. It is
square. Using your
thumbnail, pry the
cover up from the
bottom to remove.
3. Place the battery in
the battery casing.
The metal contacts of
the battery must make
contact with the metal
contacts of the battery
casing.
4. Replace the battery
cover by sliding the
notches into the
openings on the top
of the battery casing.
5. Snap the cover into
place.
Charge the Battery
You must have at least a partial charge in
the battery to make or receive calls.
To charge the battery:
1. Connect the AC
adapter to the
microUSB jack on the
side of the phone.
2. Plug the adapter into
a wall outlet.
The battery icon in the
upper-right corner of the
screen tells you whether the phone is:
– Charging (the icon is animated)
– Partially charged
– Fully charged
You can safely recharge the battery at any
time, even if it has a partial charge.
Note: Before removing the battery,
make sure the phone is powered off.