Filter
Top Products
Turning the Power On/Off
22 Turning the Power On/Off
To switch your phone on or off,
hold down for 3 seconds or more.
An animation appears on the LCD panel and the power is turned on. To
turn the power off, hold down again for 3 seconds or more.
• You can adjust the power-on tone volume or eliminate the tone.
(See page 52.)
• You can set a time at which you want your phone to switch on
automatically. (See "4. Automatically Turning the Power On" on page 61.)
You can also set the alarm so that it sounds when the power is turned on
and off.
• The time, date, and time zone can be displayed automatically after the
power is turned on. (See "2. Displaying the Date/Time Display" on page
59.)
If you perform any operation that involves reading information from
the SIM card, e.g., using the memory menu (page 44), messages menu
(page 64) or message/voice memo feature (page 87), immediately after
the phone is switched on, the message "SIM Reading..." will appear.
Wait until the SIM access has completed before performing the next
operation.
CAUTION!
NOTE
Turning the Power On
When your phone is ready for use, the standby screen appears on the LCD
panel. If the phone is not in Standby mode, one of the following messages
appears on the LCD panel depending on the phone status.
"Adjust clock"
If the clock has not been set, press to adjust the clock. (See "1.
Setting the Local Clock" on page 58.) This message also appears after a
completely discharged battery has been recharged.
"Alarm2"
When the alarm is set, the alarm sound and an alarm message notify you
once the alarm time has been reached. Even when the phone is switched
off, the phone will turn on automatically and the alarm will sound after the
set time is reached. If you do not touch any key for 30 seconds when the
alarm message is displayed, the phone will switch off automatically.
The above message indicates that "Alarm2" has been set.
(See "3. Setting the Alarm" on page 59.)
"Insert SIM"
This message indicates that no SIM card has been inserted in your phone.
Insert your SIM card correctly in the phone. (See page 19.)
"Low Battery!"
Your phone will switch off after 10 seconds. Start charging the battery as
soon as possible with the power off. (See page 17.)
"Enter PIN1"
If you have set PIN1 input to ON, you must enter your PIN1 code after
switching the phone on. (See below.)
You can set PIN1 input to OFF if you prefer. This will disable the PIN-based
safeguard for the SIM card, eliminating the need for PIN input even when
you switch on your phone. (See "2. Disabling the PIN1 Code" on page 85.)
NOTE
Clock