Filter
Top Products
You can Store a phone number in the Phone Book using the procedure
described below. The Phone Book provides 3 different areas for storing
phone numbers.
• Phone Memory
This area is the internal memory in your phone and can store up to 300
abbreviated numbers (numbered 1 to 300).
• SIM Memory
This area is the memory on the SIM card, excluding the "Fixed Dial
Memory". It can store abbreviated numbers starting from abbreviated
number 301. The size of this memory depends on the capacity of the
SIM card.
• Fixed Dial Memory
This area is the memory on the SIM card, used for dialing using the
"Fixed dial" feature. The maximum number of entries to the Fixed Dial
Memory depends on the SIM card loaded in your phone. If you set
"Fixed dial" to ON (as described in "4. Restricting Outgoing Calls Using
Fixed Dial" on page 86), your phone cannot dial any number other than
the phone numbers Stored in the Fixed Dial Memory.
1.
Enter the phone number you want to store in the Phone Book.
The entered phone number is displayed on the screen.
2.
Press .
The screen prompts you to select the area in which to store the phone
number. The required procedure varies depending on the area. Follow the
appropriate procedure below to store the phone number.
■ To store the phone number in an area other than the Fixed Dial Memory:
3.
Use / to select the desired area, then press .
The screen displays the first unassigned abbreviated number in the
selected area. Next, go to step 5.
OK
Store
39Phone Book
Phone Book
Storing a Phone Number in the Phone Book (by Entering the
Phone Number)
■
T
o store the phone number in the Fixed Dial Memory:
3.
Use / to select "Fixed yyy-zzz", then press .
The screen prompts you to enter your PIN2 code. To enter the PIN2 code,
use the same procedure as for the PIN1 code. (See page 24.)
4.
After entering the PIN2 code correctly, press .
The digits in the PIN2 code are displayed as a string of asterisks " ✻ " as
you enter them.
The screen displays the lowest abbreviated number unassigned, from Fixed
yyy to Fixed zzz.
• Pressing erases the last digit you entered as part of the PIN2 code.
Holding down for 1 second or more erases all the PIN2 code digits
you have entered.
• appears when you have entered 4 digits.
5.
Check the abbreviated number, then press .
The screen prompts you to enter a name.
• You can change the abbreviated number using / .
• Pressing with an abbreviated number displayed erases the last digit.
Holding down for 1 second or more erases all digits.
• If you select an abbreviated number which has already been assigned, a
warning appears. Pressing returns to the screen to prompt you to
select the area for storing the phone number. Pressing or
assigns the currently selected abbreviated number to the phone number
you are storing, overwriting the existing entry.
• If the entered name is too long, a warning appears. (The name can be
up to 20 characters long on 2 lines. The maximum number of characters
for a name depends on your SIM card.) Pressing any key brings you to
step 7.
OK
Quit
NOTE
OK
OK
NOTE
OK
OK