Filter
Top Products
55Settings
Settings
The "Sound Pattern" function lets you select a sound pattern as a
combination of key click, warning, and power-ON/OFF tones.
1.
Use / to select "SoundPattern", then press .
The Sound Pattern Menu is displayed. The current setting is indicated by
●. The following table shows the different sounds assigned to functions for
each sound pattern.
OK
Key click tone Warning Power ON tone Power OFF tonePattern
Pattern1
Pattern2
Pattern3
Pattern4
Sound 1-1
Sound 2-1
Sound 3-1
Sound 4-1
Sound 1-2
Sound 2-2
Sound 3-2
Sound 4-2
Sound 1-3
Sound 2-3
Sound 3-3
Sound 4-3
Sound 1-4
Sound 2-4
Sound 3-4
Sound 4-4
3-2. Setting the Sound Pattern
("Sound Pattern")
3-3. Setting the Speech Volume
("Talk volume")
The "Talk volume" function lets you set the speech volume of the
earpiece speaker.
1.
Use / to select "Talk volume", then press .
The Talk Volume Menu is displayed. A graph appears, showing the
current speech volume.
2.
Use / to set the desired speech volume.
You can adjust the speech volume in 5 steps.
You cannot use to to set the speech volume.
3.
Press .
You have now finished setting the speech volume. The screen returns to
the Volume Menu.
You can use / to control the speech volume of the earpiece speaker
during a call. To adjust the speech volume while setting a function,
press to display "±" at the center bottom of the screen, then use
/.
NOTE
Quit
CAUTION!
OK
2.
Use / to select the desired sound pattern, then press .
The screen returns to the Volume Menu.
The setting you make here assumes that each type of sound on the
Sound Volume Menu has not been set to "OFF".
CAUTION!
OK