Filter
Top Products
Getting started
11
Stand-by display
From the stand-by display:
See page 37 to set the time and
date.
Holding your phone
Making a call
The phone can make and receive
calls only when it is switched on,
unlocked (see page15), has a valid
SIM card inserted and has GSM net-
work service coverage. If the phone
cannot find a valid network the dis-
play remains blank.
replace the battery, the
phone prompts you for the
date and time.
If you insert the SIM card
incorrectly, the error message
Check SIM! appears. Remove
the cover and battery and
make sure the SIM is inserted
with the gold contacts facing
down.
If the mobile is locked, Code:
appears.
Enter the 4digit phonelock
code and press OK . The
default is 4zeros, e.g. 0000.
If your SIM is PIN protected,
Enter PIN: appears.
Enter the PIN code and press
OK . An animated screen
icon appears, then the stand-
by display.
See page 35 to change your PIN and lock codes!
Press... to...
enter phone menu.
directly access to numbers
stored in phone books.
access volume control.
access alert tones.
access the last dialled
numbers list.
stop the dialling or end a
call.
-
enter numbers in the dis-
play (see also "Speed dial-
ling", page 16).
2
3
Please be warned that you should not, when using
the hands free mode, put the phone to your ear.
Enter the desired telephone
number using the numeric keys
( - ). You can enter a maxi-
mum of 46 digits. Correct any
mistakes by pressing Clear .
Hold down this key or press
to clear the whole display.
1
How to hold
the phone
Avoid
covering
the upper
back half of
the phone so as
to allow maxi-
mum emission
and reception
quality.