Mitsubishi Electronics 110 Cell Phone User Manual


 
15
Using your phone
Using your phone
For turning on/off the mobile and mak-
ing/receiving calls, see pages 10 to 12.
Please note that all setting instructions
described in this user guide are to be
followed from the idle screen.
Standby display
Keypad lock
To prevent accidental operation of
the phone, turn on keypad lock.
You can still answer calls by press-
ing . When you end a call, the
keypad lock reactivates automati-
cally.
To turn keypad lock on:
To turn keypad lock off:
You can also use the menu:
Internet/Wireless Application Pro-
tocol (WAP™)
Press Internet in the stand-by
display to access the internet main
menu and access your home page
or any WAP™ portal. You can con-
figure up to 5WAP™ profiles and
10bookmarks. See page 47 for
more information.
Messages (SMS)
Press SMS in the stand-by dis-
play to access the short messages
menu. You can also access it from
the main menu. See page 26 for
more details.
Backlight operation
The backlight is normally off. When
a key is pressed the display and key-
pad backlight turns on for 10 sec-
onds. If an incoming call is received
the backlight turns on and remains
on for 10 seconds after the call is
answered.
Important icons
is displayed when you do not
answer one or more calls. Press
Read to view the callers' numbers
if available and the date and time the
call was received. Press to call the
number. The phone stores unan-
swered call numbers in the unan-
swered calls log (see page 29 for
details).
appears when you receive one or
several voice messages. Press Read
to view the message or press
to speed dial your voice mail mes-
sage centre (see pages 9 and 35 for
more details).
appears when you receive one or
several SMS messages. Press Read
to view the SMS inbox message.
If flashes, your inbox is full. Delete
one or more old messages to make
space for one or more new messages
(see page 26 for more details).
The display shows the number and type
of messages:
Press and hold down .
appears.
Press Unlock plus or press
and hold .
Press . Select Settings.
Select Phone settings. Select
Keypad lock to turn keypad
lock on.
Press Unlock plus to
turn keypad lock off or press
and hold .
1
2
3
Pre-programmed softkeys can be accessed from
the stand-by display. These can be for instance
Internet/Wap or SMS. The softkeys may be pro-
grammable according to your servce provider.