Filter
Top Products
17
Using your phone
Silent and vibrate alert modes
To avoid disturbing others you can si-
lence the incoming ring and alert tones.
Turning on
is displayed when the silent
alert mode feature is activated.
is displayed when the Vibrate or
Vibrate then Ring features are
activated.
Turning off
Hands free features
When you want to share your call with
an audience, or you are in your car, use
the “hands free” feature.
Turning the hands free feature on
When making a call:
When receiving a call:
Turning the hands free feature off
Muting
You can mute the microphone during a
call, e.g. when you want to talk to
someone nearby without the person on
the phone hearing.
Turning the microphone off
Turning the microphone on
Volume adjustment
To adjust the volume:
Sending DTMF tones
Some remote access services require
DTMF tones. These tones are used by
regular telephones when you dial and
when you answer questions from an
automated voice service. If you are in a
conversation and manually entering the
numbers, no extra configuration is nec-
essary. If, however, you want to send a
number stored in memory, you must set
DTMF to automatic.
Manually
To send individual DTMF tones di-
rectly from the keypad during a
conversation:
The tones are heard in the ear-
Use and and select one
of the countries. The '+' sym-
bol and the country code (e.g
+31 for the Netherlands) are
displayed. It is then possible
to enter the phone number
and store it into one of the
phonebooks (Phone names /
SIM names) or delete it.
Press .
Select Silent, Vibrate or
Vibrate then Ring.
Press .
Select Ring or Vibrate &
Ring.
If the ring tone volume is set to 0 a warning mes-
sage appears in the display.
Press Speak.on to turn the
hands free feature on during the
calling process.
Press Speak.on to accept the
incoming call.
Press Speak.off .
3
1
2
1
2
Press Options .
Select Mute and select Yes. A
warning message appears in
the display. also appears.
Press Options .
Select Unmute. A warning
message appears in the dis-
play. disappears.
A new call restores the microphone to on.
Use or to increase or
decrease the volume and
press OK .
Press Exit or wait 2 sec-
onds to return to the previous
display.
See also page 33.
Press the required keys.
1
2
1
2
1
2