Filter
Top Products
30-
Calls & Times
To set a currency value per unit:
To set call cost type to units:
Setting the credit limit (subscription dependent)
You may also be able to set a credit limit to your calls. Once the credit limit has been reached, no
more chargeable outgoing or incoming calls are allowed. You can however still make emergency
calls.
The PIN2 code is required to set the credit limit.
Show costs
Call costs - resetting all costs to zero
To reset all call costs to zero:
1
Press OK. Select Calls & Times.
2 Select Call costs.
3 Select Display cost type.
4 Select Currency. The current currency unit value is displayed.
5 Select Modify. Enter your PIN 2 code and press OK.
6 Enter the currency name (up to 3 letters). Press OK to validate.
7 Enter the unit cost (e.g.: 0.15 Euro per minute). And press OK to validate.
1
Press OK. Select Calls & Times.
2 Select Call costs.
3 Select Display cost type.
4 Select Units.
When the cost type is set to units, the credit limit and the remaining credit are shown in units.
1
Press OK. Select Calls & Times.
2 Select Call costs.
3 Select Credit limit. The display indicates the current credit limit set.
4 Select Edit. Enter your PIN 2 code and press OK.
5 Enter the credit limit (use to enter a decimal point for currencies). Press OK to validate.
When a credit limit has been set, the selection from the 'Credit limit' display is Edit or Set no limit.
1
Press OK. Select Calls & Times.
2 Select Call costs.
3 Select Show.
4 Use up and down arrow keys to display the Last Call and All Calls or show the Remaining
credits.
The remaining credit is shown in either units or currency, as set by Cost Type menu above.
1
Press OK. Select Calls & Times.
2 Select Call costs.
3 Select Reset.
4 Select Yes.
5 Enter the PIN 2 number and press OK.