Filter
Top Products
65-
Settings
To check the call divert status or deactivate it:
To cancel all call diverts,
Call waiting
This network dependent feature allows you to receive a new call while a call is already in
progress (network dependent). To activate the call waiting feature:
To put a call on hold and switch from Call 1 to Call 2:
Sending my ID
You can disable the sending of your own number on a call by call basis by adding #31# before
the number you are dialling. You can also ask your service operator to hide your mobile phone
number by default. Once hidden by your operator, you can show your number, on a call by call
basis, by entering *31# before the number you are calling.
Please contact your service provider for more information.
DIVERT OPTIONS ACTION
Always To divert all incoming voice calls.
When not
reachable
To divert all voice calls when the phone cannot be reached (out of service).
On no reply To divert all voice calls when the call is not answered.
When busy To divert all voice calls when the line is engaged.
All conditions To divert all voice calls when Not Reachable, No Reply and When Busy.
Cancel all To cancel all diverting options.
All FAX calls To divert incoming fax calls unconditionally.
All DATA calls To divert incoming data calls unconditionally.
4 Select one of these options and select OK.
5 Select Activate.
6 Select Voice Mail (if you want the calls to be diverted to your voice mailbox), Names (select
one of the phonebook entries) or Number (Enter the number to which the calls are to be
diverted and select OK. A validation message containing the selected number is displayed).
1. If the 'On no reply' option is selected, please enter the time limit (5, 15 or 30 seconds; this also depends on
your network) after which the feature is valid.
2. Call diverting must to be set for both Line 1 and Line 2. Only the selected line is affected by the call divert.
1
Press OK. Select Settings.
2 Select GSM Services.
3 Select the call diverting type to be checked or cancelled.
4 Select Status or Cancel.
1
Press OK. Select Settings.
2 Select GSM Services.
3 Select Call diverting.
4 Select Cancel all.
1. This action cancels all call diverts (voice, faxes and data calls) for the current line.
2. To cancel call diverts for the other line, you must select this line first (menu Calls & Times - Line selection).
1
Press OK. Select Settings.
2 Select GSM Services.
3 Select Call waiting.
4 Select Activate. Activated or Check your request is then displayed.
You can also cancel or check the service status.
1 Whilst a call is in progress, a beep sounds to indicate a second incoming call.
Select Replace to take Call 2 and end Call 1, Select Reject to refuse Call 2 or press the Call/
Send key to put Call 1 on hold and take Call 2.
Press the End/Off key to end Call 1 and press the Call/Send key to take Call 2.
2 Select Options then select Swap to get back to Call 1 and put Call 2 on hold or select Join
to have a 3 party conversation.