Filter
Top Products
To be able to make a video call, you must have a USIM card and be in the coverage of a
UMTS network. For availability, pricing and subscription to video call services, contact
your network service provider.
A video call can only be made between two parties. The video call can be made to a
compatible mobile device or an ISDN client. Video calls cannot be made while another
voice, video, or data call is active.
Icons
You are not receiving video (the recipient is not sending video or the network is not
transmitting it).
You have denied video sending from your device. To send a still image instead, select
Menu > Settings and Calling > Call > Image in video call.
Even if you denied video sending during a video call, the call is still charged as a video
call. Check the pricing with your service provider.
1. In the home screen, select
to open the dialer, and enter the phone number.
2. Select Options > Call > Video call.
The secondary camera on the front is used by default for video calls. Starting a video
call may take a while. If the call is not successful (for example, video calls are not
supported by the network, or the receiving device is not compatible), you are asked
if you want to try a normal call or send a message instead.
The video call is active when you see two video images, and hear the sound through
the loudspeaker. The call recipient may deny video sending (indicated by
), and
you only hear the voice of the caller and may see a still image or a grey screen.
3. To end the video call, press the end key.
During a video call
To change between showing video or hearing the voice of the caller only, select or
.
To mute or unmute the microphone, select
or .
Do not hold the device near your ear when the loudspeaker is in use, because the volume
may be extremely loud. To activate the loudspeaker, select
. If you have attached a
compatible headset with Bluetooth connectivity, to route the sound to the headset,
select Options > Activate BT handsfree.
To switch back to the handset, select
.
To use the camera in the back of your device to send video, select Options > Use
secondary camera. To switch back to the camera in the front of your device, select
Options > Use main camera.
To take a snapshot of the video you are sending, select Options > Send snapshot.
Video sending is paused and the snapshot is shown to the recipient. The snapshot is
not saved.
© 2008 Nokia. All rights reserved.32