Filter
Top Products
11
Get started
1. Connect the charger to a wall outlet.
2. Connect the charger to the device. You can use your
device while it is charging.
3. When the battery is fully charged, disconnect the
charger from the device. Disconnect the charger from
the wall outlet.
If the battery is completely discharged, it may take a few
minutes before the charging indicator appears on the
display or before any calls can be made.
The charging time depends on the charger and the battery used. Charging a BP-4L battery
with the AC-4 charger takes approximately two hours if the battery is completely empty.
■ Switch the device on or off
Press and hold the power key.
If the phone asks for a PIN code, enter the PIN code, and select OK.
If the phone asks for the lock code, enter the lock code, and select OK.
Set time and date
To set the correct time zone, time, and date, select the country you are
presently in, then enter the local time and date.
Some networks have automatic updates of time and date. For information
on this feature, contact AT&T.
■ Access codes
To set how your phone uses the access codes, select Menu > Settings > Config.> General >
Security > Phone and SIM card.
Lock code
The lock code helps to protect your phone against unauthorized use. You can create and
change the code, and set the phone to request the code. Keep the code secret and in a safe
place separate from your phone. If you forget the code and your phone is locked, your phone
will require service and additional charges may apply. For more information, contact a Nokia
Care point or your phone dealer.
When the device is locked, calls may be possible to the official emergency number
programmed into your device.
PIN codes
The personal identification number (PIN) code or the universal personal identification
number (UPIN) code (4 to 8 digits) help to protect your SIM card. The (U)PIN code is usually