Filter
Top Products
50
• Disconnect WLAN — to disconnect the active connection to the WLAN
• Refresh — to update the list of available WLANs
• Filter WLAN networks — to filter out WLANs in the list of found networks. The selected
networks are filtered out the next time the application searches for WLANs.
• Details — to view the details of the WLAN. If you select an active connection, the
connection details are displayed.
• Define access point — to create an internet access point, but not start the web browser
• Edit access point — to edit an existing internet access point
Always enable one of the available encryption methods to increase the security of your
WLAN connection. Using encryption reduces the risk of unauthorized access to your data.
■ Speech
Select Menu > Settings > Speech.
With Speech, you can set the language, voice, and voice properties for the message reader.
Edit the voice properties
To set the language for the message reader, select Language.
To set the speaking voice, select Voice. The voice is language dependent.
To set the speaking rate, select Speed.
To set the speaking volume, select Volume.
To listen to a voice, open the voice tab, select the voice, and select Options > Play voice.
■ Infrared
Do not point the infrared (IR) beam at anyone's eye or allow it to interfere with other IR
devices. This device is a Class 1 laser product.
Use infrared to connect two devices and transfer data between them. With infrared, you can
transfer data such as business cards, calendar notes, and media files with a compatible
device.
1. Ensure that the infrared ports of the devices face each other. The positioning of the
devices is more important than the angle or distance.
2. Select Menu > Settings > Infrared to switch on infrared on your device.
3. Switch on infrared on the other device and wait a few seconds until the infrared
connection is established.
4. Locate the desired file in an application or File manager, and select Options > Send > Via
infrared.
If the data transfer is not started within 1 minute after the activation of the infrared port,
the connection is cancelled and must be started again.