Filter
Top Products
Make calls
70
Send DTMF—to send DTMF tone strings, for example, a
password. Enter the DTMF string or search for it in
Contacts. To enter a wait character (w) or a pause
character (p), press repeatedly. Select OK to send the
tone.
Tip! You can add DTMF tones to the Phone number
or DTMF fields in a contact card.
Options during a video call
Select Options during a video call for the following
options: Enable or Disable (video, audio, or both),
Activate handset (if a compatible headset with Bluetooth
connectivity is attached) or Activate handsfree (when a
compatible headset with Bluetooth connectivity is
attached), Activate loudsp., End active call, Open active
standby, Use main camera/Use secondary camera,
Change image order, Zoom in/Zoom out, and Help.
The available options may vary.
Log
To monitor the phone numbers of missed, received, and
dialed voice calls, press , and select My own > Log >
Recent calls. The device registers missed and received
calls only if the network supports these functions, the
device is switched on, and within the network service area.
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press .
Call duration
To monitor the approximate duration of your incoming and
outgoing calls, press , and select My own > Log > Call
duration.
To set the display of the call timers while a call is active,
select My own > Log > Options > Settings > Show call
duration > Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code. See ‘Phone and
SIM’, p. 108.
Packet data
To check the amount of data sent and received during
packet data connections, press , and select My own >