Nokia N85 Cell Phone User Manual


 
Send my internet call ID — You can set your
internet caller ID to be displayed to or hidden from
the person to whom you are calling.
Call waiting — To be alerted for incoming calls
(network service) while you are in a call, select
Activate. To check whether the function is
activated, select Check status.
Internet call waiting — To be notified of a new
incoming internet call while you have a call in
progress, select Activated.
Internet call alert — To be alerted for incoming
internet calls, select On. If you select Off, you are not
alerted, but you receive a notification if you missed
a call.
Decline call with msg. — To send a text message
to a caller informing why you could not answer the
call, select Yes.
Message text — Write a text to be sent in a text
message when you reject a call.
Image in video call — If video is not sent during a
video call, you can select a still image to be displayed
instead.
Automatic redial — Select On, and your device
makes a maximum of 10 attempts to connect the
call after an unsuccessful call attempt. To stop
automatic redialing, press the end key.
Show call duration — Activate this setting if you
want the length of a call to be displayed during the
call.
Summary after call — Activate this setting if you
want the length of a call to be displayed after the
call.
1-touch — Select On, and the numbers assigned to
the number keys (2 to 9) can be dialed by pressing
and holding the key.
See " 1-touch dial a phone
number ," p. 125.
Anykey answer — Select On, and you can answer
an incoming call by briefly pressing any keypad key,
except the power key.
Line in use — This setting (network service) is
shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which
phone line you want to use for making calls and
sending text messages. Calls on both lines can be
answered irrespective of the selected line. If you
select Line 2 and have not subscribed to this
network service, you are not able to make calls.
When line 2 is selected,
is shown in the standby
mode.
Line change — To prevent line selection (network
service), select Disable if supported by your SIM
card. To change this setting, you need the PIN2 code.
Call forward
Press , and select Tools > Settings > Phone >
Call forwarding.
159
Settings