![](http://pdfasset.owneriq.net/c/73/c73f624e-a094-4608-9696-799295e96e58/c73f624e-a094-4608-9696-799295e96e58-bga5.png)
Packet data settings
Press , and select Tools > Settings >
Connection > Packet data.
The packet data settings affect all access points using
a packet data connection.
● Packet data connection — If you select When
available and you are in a network that supports
packet data, the device registers to the packet data
network. Starting an active packet data connection
(for example, to send and receive e-mail) is quicker.
If there is no packet data coverage, the device
periodically tries to establish a packet data
connection. If you select When needed, the device
uses a packet data connection only if you start an
application or action that needs it.
● Access point — The access point name is needed
to use your device as a packet data modem to a
compatible computer.
● High speed packet access — Enable or disable the
use of HSDPA (network service) in UMTS networks.
Wireless LAN settings
Press , and select Tools > Settings >
Connection > Wireless LAN.
● Show WLAN availability — Select whether
is
displayed in the standby mode when a wireless LAN
is available.
● Scan for networks — If you set Show WLAN
availability to Yes, select how often the device
searches for available wireless LANs and updates the
indicator.
To view advanced settings, select Options >
Advanced settings. Changing wireless LAN advanced
settings is not recommended.
SIP settings
Press , and select Tools > Settings >
Connection > SIP settings.
Session Initiation Protocol (SIP) settings are needed for
certain network services using SIP. You may receive the
settings in a special text message from your service
provider. You can view, delete, or create these setting
profiles in SIP settings.
Configurations
Press , and select Tools > Settings >
Connection > Configurations.
You may receive trusted server settings from your
service provider in a configuration message. You can
save view or delete these settings in configurations.
Access point name control
Press , and select Tools > Settings >
Connection > APN control.
165
Settings